Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 14 subscribers
  • Views 1763 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bringing an APX 120 to life and am an absolute beginner in the technical side of connectivty field. I own an XGS 107 firewall.

michael sim1

The following questions arise when bringing the APX to life.

Does the Device need a Heartbeat licence when installing via Sophos Central?

Does it need any other licence other than the heartbeat I mentioned other than those included in the default licence pack when purchased initially (WiFi licences or other)?

I'll get to SSIDs and other specifics once I've succeeded in activating the APX 120.

But does APX 120 need to go through the XGS 107 firewall or my network provider? In my idea, it seems logical seeing the APX needs the same network name to reach the Sophos Central address and go through my network provider's box to provide bandwidth. yep, I'm an absolute beginner.

Thank you for your assistance.

Michael



This thread was automatically locked due to age.
Parents
  • 0

    Dear, oh dear, this ain't working out. Tried q reset by using a pin-clip, then checked my router, found the Sophos APX 120, went online and deactivated the XGS107 local wireless application. Then, on Sophos Central and used the install wireless registration app by entering the S/N  to ape 120's registration number, multiple times, to no avail. Now I can't replace the S/N number as there's an issue between a Q or a C... and an error message occurred which I didn't manage to catch

    Michael Sim
    CISA, CISM, CRISC, retired
    Luxembourg
    Cell: +352 661 744 569
    Fixe:  (+352) 2674 3265
  • 0 in reply to michael sim1

    Sorry to hear that. Are you saying you might've entered the wrong serial number ("Q" instead of "C"), and now Sophos Central won't let you enter a different number to register it? You can register multiple APs with Central so I don't think the wrong serial number should hold things up -- that is, Central might still be waiting for the wrong serial number but you should be able to enter the new one.

    Or is the problem different? Worst case, I think Central times out waiting for your device after 20 minutes or something like that and you'd have to start over anyway. (And by "start over" I mean resetting AP, entering info in Central, etc, the whole thing, not just the last step.)

Reply
  • 0 in reply to michael sim1

    Sorry to hear that. Are you saying you might've entered the wrong serial number ("Q" instead of "C"), and now Sophos Central won't let you enter a different number to register it? You can register multiple APs with Central so I don't think the wrong serial number should hold things up -- that is, Central might still be waiting for the wrong serial number but you should be able to enter the new one.

    Or is the problem different? Worst case, I think Central times out waiting for your device after 20 minutes or something like that and you'd have to start over anyway. (And by "start over" I mean resetting AP, entering info in Central, etc, the whole thing, not just the last step.)

Children
Unfiltered HTML