Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XGS firewall DHCP - DNS

hello

configuring DHCP lease on XGS 107 firewall in "DNS server" section there is only 2 fields, is there a way to have the DHCP provide 3 DNS to clients

Thanks

Elie



This thread was automatically locked due to age.
Parents
  • Hi  Thank you for reaching out to the Sophos community. Within DHCP settings on UI as of now, it only allows to define 2 DNS server settings but there is an option "Use device's DNS settings" is there and if you check mark that box it will use Sophos Firewall as the primary and secondary DNS server, so the DNS settings defined under the DNS tab will be going to be used and there you are allowed to set 3 DNS servers on UI.




    Regards,

    Vishal Ranpariya
    Technical Account Manager | Sophos Technical Support

    Sophos Support Videos | Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question use the 'Verify Answer' link.

Reply
  • Hi  Thank you for reaching out to the Sophos community. Within DHCP settings on UI as of now, it only allows to define 2 DNS server settings but there is an option "Use device's DNS settings" is there and if you check mark that box it will use Sophos Firewall as the primary and secondary DNS server, so the DNS settings defined under the DNS tab will be going to be used and there you are allowed to set 3 DNS servers on UI.




    Regards,

    Vishal Ranpariya
    Technical Account Manager | Sophos Technical Support

    Sophos Support Videos | Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question use the 'Verify Answer' link.

Children