This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Clients don't receive an IP address from DHCP on newly created VLAN

Hi! I just created a new VLAN and DHCP server with firewall rule and clients are not able to get an IP address. My goal is to have my guest WIFI network (and if I can get this working, my IoT network) on a separate VLAN. I've restarted my switch, firewall, and DHCP server, removed and re-created everything a few times but no joy.

My newly created VLAN interface:

My new network IP host:

My newly created DHCP server on the firewall for the new VLAN:

The new firewall rule to allow traffic from the 192.168.200.0 network to the WAN (placed in top position):

I have a Unifi AP connected but have also tried a wired laptop to another dedicated VLAN port on the switch with the same results: can't get an IP address

Thanks for any help!



This thread was automatically locked due to age.
Parents Reply
  • Please check with other managed switch, as you have issues with the switch end.

    below is the configuration of the working switch.

    Regards

    "Sophos Partner: Infrassist Technologies Pvt Ltd".

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data