This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DMZ showing all IPs

I am currently checking each port of my XG firewall and I wonder even if only my notebook is connetced while all IPs are listing down when I make a full IP scan.

I use MyLanViewer and it shows

192.168.11.0

192.168.11.1

192.168.11.2

...

192.168.11.254

Is there something wrong in the setup?

In the DMZ I would expect that it shows nothing but the connected camaras (in this case) but nothing else the Notebook is connected right now.

This thread was automatically locked due to age.

Parents

0 Keyur over 4 years ago

Hi DAENG

Do you mean you are using MyLanviewer application and scan the DMZ interface and application has listed all the IP or the configured subnet IP range of the DMZ interface but as of now only your laptop is connected on the DMZ interface?

Could you please let us know the model number and firmware version number of the XG firewall?

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Keyur over 4 years ago

Hi DAENG

Do you mean you are using MyLanviewer application and scan the DMZ interface and application has listed all the IP or the configured subnet IP range of the DMZ interface but as of now only your laptop is connected on the DMZ interface?

Could you please let us know the model number and firmware version number of the XG firewall?

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 DAENG over 4 years ago in reply to Keyur

Yes, I connted the NB directly to the port where actually the Cams are connected to and let Mylanviewer scanning for IPS.

And it lists down all possible IPs 192.168.11.0-254

Its the software only I have a Supermicro Mainboard with Atom and 4 Ports.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 4 years ago in reply to DAENG

Hi,

does it show them as active? What is the range of the addresses you have assigned to this port?

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel