This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Combination regarding USB->LAN Adapter.

Hello Fellas.

Im considering to change my Home Sophos Device to a stronger machine. So ive got used laptop which has only one ethernet port. I was thinking to add another via USB.

I've found StarTech USB 3.0 to Gigabit Ethernet adapter (USB31000S) which supports: IEEE 802.1q, IEEE 802.3u, IEEE 802.3az, IEEE 802.3ab, IEEE 802.3i. The question is, is this gonna work? If sophos reconized that USB adapter, If Vlans will work etc. Does someone of you have made such combination ?:)

Ive also found: https://ideas.sophos.com/forums/17359-utm-formerly-asg-feature-requests/suggestions/3752786-networking-usb-3-0-network-adapter-support

thx for help ;)

This thread was automatically locked due to age.

Parents

0 Keyur over 4 years ago

Hi Regex

Could you please let us know which firewall product are you using? Sophos UTM 9 or Sophos XG

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel
0 Regex over 4 years ago in reply to Keyur

Oh exacly, i for got to mention.

Im using XG HOME.

__________SETUP___________

HP Small Form Factor: i5 4Cores, 8Gb of RAM.
Intel Network Card 5x Eth
SSD: 256Gb
Cancel
Vote Up 0 Vote Down

Cancel
0 Keyur over 4 years ago in reply to Regex

Hi Regex

Let me tag fellow community member rfcat_vk or they might have idea or share expertise on this.

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 4 years ago in reply to Keyur

Hi,

I found my USB -> NIC and my test XG has a USB port, so the fun begins.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 4 years ago in reply to rfcat_vk

Hi,

test progress report.

Connected a TP-Link USB3 - NIC under MR9 and MR10 and the devices not recognised. Next step is to review the BIOS settings butt hat should nt be needed because MR-9 was installed from a USB DVD drive.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 4 years ago in reply to rfcat_vk

Hi,

update.

I have been using a TP-Link UE300 for testing.

I tried with v17.5.9, V17.5.10 and V18.0.0 SR-2 and all failed to identify the USB device. Multiple restarts were tried.

Now somewhere around my home I have another USB-NIC but not sure where because none of my current devices require this type of connection.

So at this stage I would declare a failure.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 rfcat_vk over 4 years ago in reply to rfcat_vk

Hi,

update.

I have been using a TP-Link UE300 for testing.

I tried with v17.5.9, V17.5.10 and V18.0.0 SR-2 and all failed to identify the USB device. Multiple restarts were tried.

Now somewhere around my home I have another USB-NIC but not sure where because none of my current devices require this type of connection.

So at this stage I would declare a failure.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data