Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Sophos Firewall

Discussions Site2Site tunnel zwischen zwei Sophos XG und Fritzbox

Sophos Firewall requires membership for participation - click to join

Thread Info

State Not Answered
Locked Locked
Replies 1 reply
Subscribers 40 subscribers
Views 637 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site2Site tunnel zwischen zwei Sophos XG und Fritzbox

Christoph Reisbach-Sawinski over 4 years ago

Hallo zusammen,

ich habe folgende Konstellation:

HQ: XG320

Homeoffice: XG320 hinter einer FritzBox

Site 2 Site VPN läuft. Alles ohne Probleme.

Es gibt ein Client VLAN im Homeoffice mit dem ich mich problemlos ins HQ verbinden kann und umgekehrt klappt auch alles.

ABER: Ich möchte vom HQ auf die FritzBox zugreifen können.

Konfig: PortE0.1220 10.10.10.x

Port E1 feste IP in der Range der Fritzbox 192.168.178.x

Ich komme aus dem Homeoffice auf die Fritzbox. Nur aus dem HQ nicht.

Welchen Denkfehler habe ich?

LG
Christoph

This thread was automatically locked due to age.

Parents

0 KingChris over 4 years ago

Hello Christoph Reisbach-Sawinski

Based on the translation provided by Google, it sounds like you would like to access a device on your home network which is connected to an IPsec site-to-site tunnel from your office.

You will need to ensure that the IP range of the device (Fritzbox) is in the IPsec tunnel configuration on both ends.

That should then allow you to route over the IPsec tunnel to the Fritzbox.

Thanks!

KingChris
Community Support | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 KingChris over 4 years ago

Hello Christoph Reisbach-Sawinski

Based on the translation provided by Google, it sounds like you would like to access a device on your home network which is connected to an IPsec site-to-site tunnel from your office.

You will need to ensure that the IP range of the device (Fritzbox) is in the IPsec tunnel configuration on both ends.

That should then allow you to route over the IPsec tunnel to the Fritzbox.

Thanks!

KingChris
Community Support | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data