This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cyberoam To SOPHOS failed to boot

I have Cyberoam CR50iNG - 10.6.5 and I downloaded HW-SFOS_16.05.6_MR-6.SFW-266.gpg and uploaded the firmware and boot. But unfortunately Cyberoam CR50iNG gets corrupted during the boot process and can't load the SOPHOS OS. The only option I can do is to revert back and load the old Cyberoam firmware.

Following are the screenshots of the occurred problems. Please any help will be blessing to me.

Thank You

Govinda Thapa

This thread was automatically locked due to age.

0 Ammar ALBAYATI over 6 years ago

I face same problem , can you pleas tell me how you solve it , thanks in advance
Cancel
Vote Up 0 Vote Down

Cancel
0 Govinda Thapa over 6 years ago in reply to Ammar ALBAYATI

YOU JUST NEED TO BOOT INTO CYBEROAM FIRMWARE AND IN THE PASSWORD SECTION JUST TYPE RESET IN ALL CAPS LOCK FORM AND THAT'S IT...

IF THIS WONT WORK THEN YOU CAN DOWNLOAD CYBEROAM FIRMWARE FROM THE INTERNET AND DURING BOOTING, BOOT INTO CYBEROAM LOADER AND UPLOAD THE DOWNLOADED FIRMWARE AND YOU AGAIN WILL HAVE A FACTORY DEFAULT CYBEROAM DEVICE. THANK YOU
Cancel
Vote Up 0 Vote Down

Cancel
0 Ammar ALBAYATI over 6 years ago in reply to Govinda Thapa

Thanks For your Replay , Actually i need to know why we face this problem? such your case with Sophos OS , as i need to keep Sophos not go back to Cybroam again

Did you have any idea how we can boot form Sophos OS without above problem ?
Cancel
Vote Up 0 Vote Down

Cancel
0 sohc over 4 years ago in reply to Ammar ALBAYATI

I am on the same boat - anyone have a solution to this?

It boots fine on Cyberoam firmware but won't boot on Sophos OS just displays garbled text
Cancel
Vote Up 0 Vote Down

Cancel
0 sohc over 4 years ago in reply to Govinda Thapa

booting to Cyberoam OS is not the problem it's the boot up to SOPHOS OS
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 4 years ago in reply to sohc

I would suggest you raise a case with support or contact your resller/partner.

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
+1 Keyur over 4 years ago

Hi Govinda Thapa

Please refer to migration guide - http://docs.sophos.com/nsg/sophos-firewall/v16012/PDF/Cyberoam%20to%20Sophos%20Firewall%20Migration%20Guide.pdf

https://community.sophos.com/kb/en-us/123365

Regards,

Keyur
Community Support Engineer | Sophos Support
Sophos Support Videos | Knowledge Base | @SophosSupport | Sign up for SMS Alerts |
If a post solves your question use the 'This helped me' link
Cancel
Vote Up 0 Vote Down

Cancel
0 sohc over 4 years ago in reply to sohc

Problem solved: setting the com port to 38400 allowed me to read what is happening.

https://community.sophos.com/kb/en-us/123197

I was able to migrate the backup CR50ing to Sophos XG.
Cancel
Vote Up 0 Vote Down

Cancel