This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bandwith Issues Chrome/Firefox/Edge

We have been using Sophos intercept x advanced with MTR for about 6 weeks. Since then, our bandwidth has dropped 90%. We use a gigabit internet connection and have previously achieved the following values ​​in a speed test in the browser: Down: 900MB/s Up: 800MB/s

Now, if we're lucky, we'll get Down: 60MB/s Up: 300MB/s.

We found out that it is due to the following settings:
 If these settings are deactivated, we have full bandwidth when surfing again. But we don't want to leave them disabled. This is not a condition, the support from Sophos is not getting anywhere either. We expected more...


here are the screenshots from the speedtest:

deactivated settings:


activated settings:




This thread was automatically locked due to age.
Parents
  • Have a case open with support with regards to this.

    I am on a 1Gbps connection and with NTP enabled i get around 98Mbps down, with NTP disabled i get 812Mbps

    Upload seems unimpacted (as im only on a 50Mbps upload plan)

    NTP on:

    NTP Off:

    Speed test through CLI does not seem to be impacted by this.

Reply
  • Have a case open with support with regards to this.

    I am on a 1Gbps connection and with NTP enabled i get around 98Mbps down, with NTP disabled i get 812Mbps

    Upload seems unimpacted (as im only on a 50Mbps upload plan)

    NTP on:

    NTP Off:

    Speed test through CLI does not seem to be impacted by this.

Children