Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 2069 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wie filtert man nach einem Port?

Karsten Schirmacher

Ich habe 11 Seiten in der Portliste und ich suche nach einem evtl vorhandenen Port, z.B. 1234 damit ich diesen nutzen onder neu anlegen kann.

Wie um alles in der Welt kann man die Portliste nach Ports durchsuchen? Ich kann nur nach Namen filtern, jedoch nicht nach Ports?

Danke für Eure Hilfe!



This thread was automatically locked due to age.
Parents
  • 0

    Hi Karsten ,

    Are you searching for the list in services ?

    There is one way to get a consolated view but it is an extra step and the data will be in xml format. 

    Steps:

    1. Go to Backup and Firmware > Import Export> Export Selective Configuration > Services or any configuration you want isolate . 

    2. The file will be downloaded in .tar file and can be extracetd to a XML  file and you can open the file using Notepad ++ or notepad.

    3. Search the port number and check the relavent Service Name and you can filter based on Filter name. 

    Sample Attached.

    5327.Entities.xml

    Regards,

    Aditya Patel
    Global Escalation Support Engineer | Sophos Technical Support
    Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts
    If a post solves your question use the 'This helped me' link.

Reply
  • 0

    Hi Karsten ,

    Are you searching for the list in services ?

    There is one way to get a consolated view but it is an extra step and the data will be in xml format. 

    Steps:

    1. Go to Backup and Firmware > Import Export> Export Selective Configuration > Services or any configuration you want isolate . 

    2. The file will be downloaded in .tar file and can be extracetd to a XML  file and you can open the file using Notepad ++ or notepad.

    3. Search the port number and check the relavent Service Name and you can filter based on Filter name. 

    Sample Attached.

    5327.Entities.xml

    Regards,

    Aditya Patel
    Global Escalation Support Engineer | Sophos Technical Support
    Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts
    If a post solves your question use the 'This helped me' link.

Children
Unfiltered HTML