I just received an Access Point to use with my UTM.
The process of configuring the device appears broken which I assume means it hasn't been designed properly.
I plug the AP15 into my switch and the UTM can see it - a good sign.
I setup the Wireless Network under Wireless Protection > Wireless Networks using conventional parameters.
Under Wireless Protection > Access Points, elect the AP15 and check the newly defined Wireless Network (the only one configured)
Under Wireless Protection > Access Points > Edit Access Points > Advanced I've tried changing Dynamic Channel to no effect. Also, I cannot choose channels, the only option is "Auto".
VLAN tagging is off as is Time-based scan. STP is disabled.
Mesh Networks are left unconfigured. Wioreless Clients indicate none and Hotspots are left unconfigured.
The Wireless status indicates "AP15 is inactive, Location: AP15 etc... etc...
The firewall logs show the device is attempting to connect to the following IPs: Some NTP servers not configured in my UTM and some HTTPS connections to Amazon AWS servers.
|
Autoscroll |
Reload
|
17:27:53 | Default DROP | TCP |
|
→ |
|
|
17:27:55 | Default DROP | TCP |
|
→ |
|
|
17:27:55 | Default DROP | TCP |
|
→ |
|
|
17:27:58 | Default DROP | TCP |
|
→ |
|
|
17:28:01 | Default DROP | TCP |
|
→ |
|
|
17:28:03 | Default DROP | TCP |
|
→ |
|
|
17:28:12 | Default DROP | UDP |
|
→ |
|
|
17:28:12 | Default DROP | UDP |
|
→ |
|
|
17:28:12 | Default DROP | UDP |
|
→ |
|
|
17:28:12 | Default DROP | UDP |
|
→ |
|
|
17:28:58 | Default DROP | TCP |
|
→ |
|
|
17:28:58 | Default DROP | TCP |
|
→ |
|
|
17:29:01 | Default DROP | TCP |
|
→ |
|
|
17:29:05 | Default DROP | TCP |
|
→ |
|
|
17:29:08 | Default DROP | TCP |
|
→ |
|
|
17:29:08 | Default DROP | TCP |
|
→ |
|
|
17:29:11 | Default DROP | TCP |
|
→ |
|
|
17:29:13 | Default DROP | TCP |
|
→ |
|
|
17:29:15 | Default DROP | TCP |
|
→ |
|
|
The Wireless Protection Logs show a constantly repeating...
This thread was automatically locked due to age.