Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 4045 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP55Cs + SG135, need a guest SSID that can access ONE specific LAN resource, cannot fathom how!

DannyO'Neill

I have a pair of AP55Cs controlled by an SG135 in a branch office. All works well, guest network for phones on different dhcp range configured by wizard, plus a 'staff' SSID with bridged access to LAN resources - DHCP for the lan happens to also run on the firewall as there are no servers there (branch office).

I now have a requirement for guests to be able to access one PC. It is one running an appleTV/screenCast/project server software and is hooked to a giant TV. That software must initially announce itself to clients by broadcasting on it's subnet, so I need a new wifi for guests that can be on same LAN network as that PC, be able to talk to said PC (on fixed IP), but not get to anything else.

If I had old fashioned access points and SSID separating things with vlans and separate dhcp servers I'd happily set up firewall rules on the routing device between the networks to allow things from the relavent range for the guest2<->SpecificPC_IP. But I can't quite work out how to do it with the SG135 + AP55Cs, hopefully I just don't quite get how the WLAN 'interface' really works or am missing a trick somewhere.

If I create a new dhcp range for the WLAN interface, it will only allow it to be on the same subnet as is defined on the interface, and is hence different to the LAN - so the broadcasts wont get to clients. If I setup the SSID to be 'bridged to LAN' and hence let it have an IP on the LAN, I could get the traffic working, but that network would also be able to EVERYING on the LAN as the wifi clients would get unknown IPs on the LAN segment and so I couldn't build a rule to shape their traffic.

Thanks!!



This thread was automatically locked due to age.
Parents
  • 0

    Since you need broadcast traffic you are right that you need to be in the same physical subnet as your cast device. However if this is the same subnet where your local PC's also reside (and need to be in) than I think this is not manageble from within UTM.

    I think you could do something with ie. a Cisco switch as your LAN switch and then configure Acces Lists on the Cisco switch to allow clients to only access this device.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0

    Since you need broadcast traffic you are right that you need to be in the same physical subnet as your cast device. However if this is the same subnet where your local PC's also reside (and need to be in) than I think this is not manageble from within UTM.

    I think you could do something with ie. a Cisco switch as your LAN switch and then configure Acces Lists on the Cisco switch to allow clients to only access this device.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML