Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 8255 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP's over layer 3?

Louis-M

Do the AP's work over layer 3? If so, how do they advertise themselves to the UTM?
I can only think it must be done by DNS automatically or something entered manually on each AP?



This thread was automatically locked due to age.
Parents
  • 0

    UTM Wireless Protection listens for traffic from 1.2.3.4.  You only need to route traffic to that IP to the UTM on one of the interfaces in 'Allowed Interfaces' on the 'Global' tab.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    UTM Wireless Protection listens for traffic from 1.2.3.4.  You only need to route traffic to that IP to the UTM on one of the interfaces in 'Allowed Interfaces' on the 'Global' tab.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson

    Sorry, you've lost me on that one. If we have the following:

    REMOTE SITE = 10.1.1.0/24 (dhcp served from central site)
     |
    MPLS Network (only route out to internet is via central site & UTM)
     |
    CENTRAL SITE = 10.1.100.0/24 (dhcp server leases ip's & ranges to remote sites)
     |
     |
    UTM
     |
    Internet

    From what I'm told, the AP's are plug and play once the UTM has been configured. In the above scenario, anything at the remote site that wants to access anything that the network doesn't know about eg internet address, will automatically route to the UTM and internet>
    So are you saying that the AP will try and access 1.2.3.4 which the UTM will have as a virtual address?

  • 0 in reply to Louis-M

    Yes, as long as the MPLS traffic comes in to an interface that is in 'Allowed Interfaces' in Wireless Protection.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    hi bob - which tcp/udp ports are needed ?

    thanks

Unfiltered HTML