@Hari: Here the contents of the built-in WebAdmin help/admin guide on this topic:
Note – To introduce the usage of VLAN for your access points in your network, take the following steps: Connect the AP to the UTM using standard LAN for at least a minute. This is necessary for the AP to get its configuration. Connecting it via VLAN from the beginning, the AP would not know of being in a VLAN and therefore would not be able to connect to the UTM to get its configuration. When the AP is displayed, enable VLAN tagging and enter the VLAN ID. Then connect the AP to its intended VLAN, e.g., a switch.
Also, please be more descriptive in your titles for new threads. Two threads by you with the title ap55, with different issues. Makes it harder to get you help and very difficult for others in future with the same issue to find your thread. I've changed the titles of these two threads to make the issues more understandable at a glance.
__________________ ACE v8/SCA v9.3
...still have a v5 install disk in a box somewhere.
