Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 6280 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Ap55 - AP static address

Harikrish
HI Sir,

how to configure ip address manually in ap55 via cli mode

if it is possible


This thread was automatically locked due to age.
Parents
  • 0
    APs get their address via DHCP.  If you want a "static" address for the AP, you will need to configure a DHCP reservation on your DHCP server (or UTM, as the case may be).

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0 in reply to BrucekConvergent
    APs get their address via DHCP.  If you want a "static" address for the AP, you will need to configure a DHCP reservation on your DHCP server (or UTM, as the case may be).

    Ah - I was wondering this too. So there is no way to set a static address on an AP. It makes sense as to why but some scenarios require it.
Reply
  • 0 in reply to BrucekConvergent
    APs get their address via DHCP.  If you want a "static" address for the AP, you will need to configure a DHCP reservation on your DHCP server (or UTM, as the case may be).

    Ah - I was wondering this too. So there is no way to set a static address on an AP. It makes sense as to why but some scenarios require it.
Children
Unfiltered HTML