Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 1732 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bridged AP Not Listed

check12
Hi Guys,
UTM noob here using the latest updates for the UTM home edition. I also purchased the AP50 and have it up and running.

I am running into an issue though with setting up a bridged wireless network.

When I create a new wireless network and set it to "Bridge to AP LAN" and then go to Interfaces and try to create a bridged LAN, I never see the wireless interface I just created listed. I only see the available NIC I have that I wish to bridge with the AP.

I am sure I am missing something obvious here. I have read over a lot of information but I can't seem to get it to appear in the list. I do have "Separate Zone" up and running fine (although it is much slower than my Asus APs that I had been using).

Thanks in advance for any help.


This thread was automatically locked due to age.
Parents
  • 0
    Yes, you are making this more complicated than you need to.  You should not bridge the existing Internal interface with an SSID you created with "Separate Zone" selected.

    When you choose "Bridge to AP LAN" in the wireless network definition, the bridging is complete.  A device connected wirelessly to that SSID will be inside the LAN and will receive the same DHCP assignments as the wired devices in the LAN.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Yes, you are making this more complicated than you need to.  You should not bridge the existing Internal interface with an SSID you created with "Separate Zone" selected.

    When you choose "Bridge to AP LAN" in the wireless network definition, the bridging is complete.  A device connected wirelessly to that SSID will be inside the LAN and will receive the same DHCP assignments as the wired devices in the LAN.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML