This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30 ignoring DHCP Option 234 - AP15 works

Good morning,

I've noticed that using DHCP Option 234 (wireless-magic-IP) pointing to my Sophos UTM works fine for new AP15 models.
AP30 does not even request DHCP Info ID 234 und therefore does not follow these infos.

I will attach a wireshark comparision here:

Can the AP30 get an firmware-update or fix for this issue?
FYI: My Sophos UTM is on Version Release 9.306-6 .

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 9 years ago

to redirect the 1.2.3.4 to another UTM on an other network?
Exactly. [:)]

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 9 years ago

to redirect the 1.2.3.4 to another UTM on an other network?
Exactly. [:)]

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 twister5800 over 9 years ago in reply to Scott_Klassen

Exactly. [:)]

Aha! - That's a nice one to know, so you can actually set it to 192.168.10.1, if thats the Internal Ip of another UTM in an VPN environment, consolidating the AP's there?

-----

Best regards
Martin

Sophos XGS 2100 @ Home | Sophos v20 Technician
Cancel
Vote Up 0 Vote Down

Cancel