Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 1 subscriber
  • Views 15875 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30 ignoring DHCP Option 234 - AP15 works

DarkKnight93
Good morning,

I've noticed that using DHCP Option 234 (wireless-magic-IP) pointing to my Sophos UTM works fine for new AP15 models.
AP30 does not even request DHCP Info ID 234 und therefore does not follow these infos.

I will attach a wireshark comparision here:


Can the AP30 get an firmware-update or fix for this issue?
FYI: My Sophos UTM is on Version Release 9.306-6 .


This thread was automatically locked due to age.
Parents
  • 0
    Hi guys, Why use this option anyway? to redirect the 1.2.3.4 to another UTM on an other network? 192.168.x.x??
     
    Did not know that was possible.

    Sent from my iPhone using Astaro.org

    -----

    Best regards
    Martin

    Sophos XGS 2100 @ Home | Sophos v20 Technician

Reply
  • 0
    Hi guys, Why use this option anyway? to redirect the 1.2.3.4 to another UTM on an other network? 192.168.x.x??
     
    Did not know that was possible.

    Sent from my iPhone using Astaro.org

    -----

    Best regards
    Martin

    Sophos XGS 2100 @ Home | Sophos v20 Technician

Children
No Data
Unfiltered HTML