Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 6940 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP100 needs restart

adhodgson
Hi Guys,

I have an AP100 connected to an SG135 through a Draytek router using POE.

Twice this weekend I have needed to reboot the AP as it has appeared to not accept wireless traffic.  The light on the top appears to flash every few seconds, but not as if it is passing data.

On a restart it is fine.

Anyone else seen this?

Also, anyone know what the USB socket does on this unit?
Thanks.
Andrew.


This thread was automatically locked due to age.
Parents
  • 0
    Is this issue still happening with your AP100's? I just swapped out 3 AP50's with AP100's. It seems like one of them has been doing the exact same thing that yours did/does.

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Reply
  • 0
    Is this issue still happening with your AP100's? I just swapped out 3 AP50's with AP100's. It seems like one of them has been doing the exact same thing that yours did/does.

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Children
No Data
Unfiltered HTML