This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP100 needs restart

Hi Guys,

I have an AP100 connected to an SG135 through a Draytek router using POE.

Twice this weekend I have needed to reboot the AP as it has appeared to not accept wireless traffic. The light on the top appears to flash every few seconds, but not as if it is passing data.

On a restart it is fine.

Anyone else seen this?

Also, anyone know what the USB socket does on this unit?
Thanks.
Andrew.

This thread was automatically locked due to age.

Parents

0 adhodgson over 9 years ago

Hi,

I had a similar issue today and had to restart the AP around 22:40. In this case I lost the SSID I have on the 5GHZ channel "HODGSON_5G" whilst the 4GHZ channel still was showing up as available. The system has been stable for around a week now.

I have attached today's wireless log in full as I don't know what may be relevant. The AP100 has the IP 192.168.0.2.

The logs can be found here:

https://www.dropbox.com/s/if8kduvlp3e0dhc/logfiles_20150116230555.zip?dl=0

Thanks.
Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 adhodgson over 9 years ago

Hi,

I had a similar issue today and had to restart the AP around 22:40. In this case I lost the SSID I have on the 5GHZ channel "HODGSON_5G" whilst the 4GHZ channel still was showing up as available. The system has been stable for around a week now.

I have attached today's wireless log in full as I don't know what may be relevant. The AP100 has the IP 192.168.0.2.

The logs can be found here:

https://www.dropbox.com/s/if8kduvlp3e0dhc/logfiles_20150116230555.zip?dl=0

Thanks.
Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data