Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 115 replies
  • Subscribers 1 subscriber
  • Views 74656 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bad throughput after 9.30*

Lionking
My guest WLAN (separate zone) is unusable after upgrading to 9.301. My other two WLANs that are bridged to LAN works fine.


This thread was automatically locked due to age.
Parents
  • 0
    Rather than go back to 9.209, I tried the "classic" approach to solving computer problems.  At first, I thought it hadn't worked, but I checked the available WiFi networks available five minutes later, and the AP 30 was goin' strong.

    I disabled and then enabled the Access Point and then toggled Wireless Protection off/on - the AP came back up in a few minutes.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Rather than go back to 9.209, I tried the "classic" approach to solving computer problems.  At first, I thought it hadn't worked, but I checked the available WiFi networks available five minutes later, and the AP 30 was goin' strong.

    I disabled and then enabled the Access Point and then toggled Wireless Protection off/on - the AP came back up in a few minutes.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    I have no problem with unavailable APs or WLANs, just terrible throughput on Guest WLAN
  • 0 in reply to Lionking
    Hello,

    I have the same problem with Guest WLAN (Separate Zone) on two different systems. Firmware version: 9.301-2.

    The wireless log show errors 

    2014:11:18-13:42:26 192.168.0.119 kernel: [ 6035.600000] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2

    2014:11:18-13:42:26 192.168.0.119 kernel: [ 6035.620000] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2

    2014:11:18-13:42:26 192.168.0.119 kernel: [ 6035.640000] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2

    2014:11:18-13:42:26 192.168.0.119 kernel: [ 6035.660000] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2

    2014:11:18-13:42:26 192.168.0.119 kernel: [ 6035.670000] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Unfiltered HTML