This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Display Hostnames of Wireless Clients

Is there a way to make sure that the Sophos Wireless panel displays the hostnames of devices instead of just the MAC address (other than manually entering it)? We have a request route to the correct DNS server, and the device addresses exist in the Forward and Reverse Lookup Zone. Resolving the IP from the name of a device works from the Sophos UTM.

Is this by design or should I see hostnames there?

This thread was automatically locked due to age.

Parents

0 CClasen over 10 years ago

I should also state that we are NOT using the UTM as our DHCP server -we're using a MS server which is registering all leases in DNS.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 CClasen over 10 years ago

I should also state that we are NOT using the UTM as our DHCP server -we're using a MS server which is registering all leases in DNS.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 rfcat_vk over 10 years ago in reply to CClasen

Hi,
the wireless clients are identified in the wireless section by editing the entry, there is no relationship to any other information except the MAC address .

What you are asking makes sense, but is not currently available.

You would need to submit a feature request or check there isn't already one waiting for action by Sophos.

Ian[[[:)]]][[[:)]]][[[:)]]]

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel