Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 3936 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 110 and AP10 setup

dknyinva
Hello,

Just got a new UTM 110 and AP10 for a client.  Could someone suggest the best way to connect the AP10, so it can utilize the web protection on the UTM?  

 - #1 Connect to one of the Interface on the UTM ether2 or
 - #2 Connect to a Netgear switch

I tried #2 and let it auto configure with wlan0, but web security is not filtering client connect to the AP10

Thanks for any suggestion


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to vilic
    Hi dknyinva, 

    In order to create a new wlan interface you must have at least one SSID configured in separated zone.
    vilic, you're right on the nose[;)].  Did what you suggested and I'm good to go.

    I appreciate your help
Unfiltered HTML