Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 3936 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 110 and AP10 setup

dknyinva
Hello,

Just got a new UTM 110 and AP10 for a client.  Could someone suggest the best way to connect the AP10, so it can utilize the web protection on the UTM?  

 - #1 Connect to one of the Interface on the UTM ether2 or
 - #2 Connect to a Netgear switch

I tried #2 and let it auto configure with wlan0, but web security is not filtering client connect to the AP10

Thanks for any suggestion


This thread was automatically locked due to age.
Parents
  • 0
    If you create SSID in separate zone then you should also:
    1. Create new Interface for wlan0 with static IP address different from your LAN network.
    2. Create new DHCP server bounded to that interface.

    Test if it works, and then continue with:
    3. Add that interface into DNS allowed networks.
    4. Create new Masquerading rule for that interface.
    5. Create Firewall rule for that interface or add it to Web Protection profile.
  • 0 in reply to vilic
    Hello vilic,

    Can't seem to create a wlan0 interface.  Option doesn't list wlan0 as an option.  Please advice

    Thanks
Reply Children
No Data
Unfiltered HTML