Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 3936 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 110 and AP10 setup

dknyinva
Hello,

Just got a new UTM 110 and AP10 for a client.  Could someone suggest the best way to connect the AP10, so it can utilize the web protection on the UTM?  

 - #1 Connect to one of the Interface on the UTM ether2 or
 - #2 Connect to a Netgear switch

I tried #2 and let it auto configure with wlan0, but web security is not filtering client connect to the AP10

Thanks for any suggestion


This thread was automatically locked due to age.
Parents
  • 0
    Hi,
    you connect the AP10 to any network point on the internal network. 
    You bridge the AP10 network to the local (internal) network and that should work.

    I assume you have setup the SSID and accepted the AP10?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0
    Hi,
    you connect the AP10 to any network point on the internal network. 
    You bridge the AP10 network to the local (internal) network and that should work.

    I assume you have setup the SSID and accepted the AP10?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML