Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 1 subscriber
  • Views 1321 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP10 in Branch Office without RED

pfeigl
Hi,

we are running the following setup:
- Lancom Router at branch office
- UTM 9.2 (SG210) at central site
- site-to-site VPN between those sites

What are the steps to create a setup with the AP10 in the branch office but connected to our central UTM?

How it the "search" process on the AP actually working and which traffic do we have to route into the main site?

Thanks for your help,
Philipp


This thread was automatically locked due to age.
  • 0
    Route traffic at the branch site destined for IP 1.2.3.4 back across the tunnel to the UTM... the AP pulls a DHCP address from a local DHCP server, then tries to "phone home" via this address when unprovisioned, or after connection to the provisioned UTM fails a certain number of times, etc.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Unfiltered HTML