This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hotspot config

I tried setting up a hotspot using the following;
https://community.sophos.com/products/unified-threat-management/astaroorg/f/51/t/21968 (thanks BarryG[:)])

I have flashed a WRT54GL Linksys with dd-wrt firmware and set it up as AP with DHCP disabled and in UTM created a DHCP range on the interface.
Enabled wireless security on the WRT54GL
The WRT54GL connects to the UTM on his own interface (a 3rd NIC) on his own range 192.168.1.1/24
My normal LAN is 10.0.0.2/16

Created a hotspot named HOTSPOT in UTM, but it does not work.
Have i missed something or is there a complete tutorial for my setup?


This thread was automatically locked due to age.
Parents
  • It sounds like there's a configuration problem.  Please click on [Go Advanced] and attach a picture of your DHCP server config.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • It sounds like there's a configuration problem.  Please click on [Go Advanced] and attach a picture of your DHCP server config.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • It sounds like there's a configuration problem.  Please click on [Go Advanced] and attach a picture of your DHCP server config.

    Cheers - Bob

    Even when i manually put an 192.168.1.5 IP address on the NIC i can PING the gateway 192.168.1.1 but have no loginpage of the hotspot.
    attached the screenshot

    Thanks for the help so far!