Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 1134 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

What are the APs able to do

Connaisrien
I used to do it all with Tomato routers, 

but if I can get this to work with AP30s and AP10s 
well....
so 
the question:
I intend to use an AP30 to replace a Tomato access point for wireless clients like laptops and phones and tablets, 
but also at the same time 
I would like  to replace a tomato router, configured in client-mode, 
meaning that the AP10 would wirelessly connect to the AP30 as a client ( not mesh) and I would then put AP10's wired ethernet port into an 8-port ethernet switch , that would result in get all the 'switch-wired' devices on the network ...


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Connaisrien
    You are talking about mesh and only ap50s can do that.
    What I am suggesting is not in my opinion mesh.

    Ian

    Update. no it did not work. Thoughts, maybe a dhcp server on the other network so the AP can still be seen on the network. Also not sure if the AP10 sends UTM connectivity information out the LAN only.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML