I thought I would try this great new access point idea...
I bought and installed a AP10.
I tried the auto set up but deleted it.
I manually configured a spare nic named it "wireless".
I added "wireless to the DNS allowed networks.
I added a new DHCP server to the list and assigned it to "wireless".
I added a Masquerading NAT.
I went to the "Wireless Protection" section of the UTM.
I added "Wireless" to the allowed interfacess in Wireless Portection.
I added a wireless network with WPA2 AES (Secure).
I set the frequency to 2.4 Ghz (AP10).
I set the SSID and pass-phrase.
The wireless network label has (on wlan0) on the right.
I plugged in the AP10 to power.
I plugged in the cat5 from the appropriate nic.
I accepted the AP10 to active and renamed it.
I placed a check next to the wireless network I previously created.
No group, power 100%, channel - auto, STP - disabled, vlan tag - disabled
Tried to connect...
SSID seen, Pass-phrase accepted, optaining IP address...then nothing
The log from the DHCP server shows the the AP10 receive its IP but no other activity. I have tried multiple devices and can not obtain an IP address.
Any clues as to what I am overlooking?
This thread was automatically locked due to age.