Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 1879 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless Roaming Faulty

Breakingcustom
I know I'm not going to get the roaming capabilities of like Meru, but I just did some initial testing on Lenovo Twist with inSIDDER Office running and walked around the building to see signal strengths and see if the AP would roam.

At first it didn't, but I forgot to change the Roaming Aggressiveness up to 5 on the Intel Centrino Wifi card.  While walking around for about 15 minutes the laptop only successfully reassociated to a different access point when it was near it.

Is there anything to help the roaming capabilities on the UTM? I know the wireless client card would have to be changed to a higher level or is it best to lower the transmit power for the specific antenna?


This thread was automatically locked due to age.
Parents
  • 0
    Roaming is largely controlled by the wireless client.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • 0
    Roaming is largely controlled by the wireless client.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
Unfiltered HTML