This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30 - UTM9 - Wireless Broadcast

I have a UTM9 appliance, i have the static route of 1.2.3.4 255.255.255.255 10.1.1.1 (Gateway appliance IP) configured in my router.
I can ping the AP
I can trace 1.2.3.4 which arrives at the gateway appliance, however the Access Point never registers with the appliance.

This thread was automatically locked due to age.

Parents

0 BAlfson over 11 years ago

I can't "see" what's happening when you try with the bridged interface, but it seems like the traffic is just passed through. This increases my guess that there might be some unexpected issues with bridging in V9. If you have a paid subscription, please submit a support request.

Maybe if you put 1.2.3.4 as an Additional Address on br0, that will let awed (the wireless daemon) get the packets before they leave the interface. Did that work?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 11 years ago

I can't "see" what's happening when you try with the bridged interface, but it seems like the traffic is just passed through. This increases my guess that there might be some unexpected issues with bridging in V9. If you have a paid subscription, please submit a support request.

Maybe if you put 1.2.3.4 as an Additional Address on br0, that will let awed (the wireless daemon) get the packets before they leave the interface. Did that work?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data