Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 1901 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30 - UTM9 - Wireless Broadcast

paul.hurst@airdrie.ca
I have a UTM9 appliance, i have the static route of 1.2.3.4 255.255.255.255 10.1.1.1 (Gateway appliance IP) configured in my router.
I can ping the AP 
I can trace 1.2.3.4 which arrives at the gateway appliance, however the Access Point never registers with the appliance.


This thread was automatically locked due to age.
Parents
  • 0
    Hi,
    After the initial configuration, you should be able to hook the AP to a trunked port.
    Make sure the admin address of the AP is in a VLAN that is trunked to the AP, and back to the firewall.

    Barry
Reply
  • 0
    Hi,
    After the initial configuration, you should be able to hook the AP to a trunked port.
    Make sure the admin address of the AP is in a VLAN that is trunked to the AP, and back to the firewall.

    Barry
Children
No Data
Unfiltered HTML