Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 2568 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP50 LED Disable

mini-me
Any way to do this in 9.1+ firmware?


This thread was automatically locked due to age.
  • 0
    No there is no way. Why not simply put some insulation sticky tape over the LEDs? Trivial problems demand trivial solutions ;-)
  • 0 in reply to trollvottel
    Yep, use the American solution, Duct-Tape [:)] 

    Just curious, why are you worried about a little light?

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0 in reply to BrucekConvergent
    Also, optionally (and I do not recommend this, but I've seen it done in similar situations, not with APs, but other electronics with lights that someone found offensive in some way)... you could open the casing and de-solder or cut the leads to the LED(s) in question... but that would DEFINITELY void the warranty, and I'm not saying in any way that this wouldn't cause other damage or issues.  Attempt at your own risk.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0
    FYI, there are 2 feature requests for this in UTM (Formerly ASG) Feature Requests: Hot (1298 ideas)
    http://feature.astaro.com/forums/17359-utm-formerly-asg-feature-requests?query=led

    One requester prefers a more 'stealthy' appearance, the other says hotel guests complain about the bright lights.

    I have my AP30 just outside my bedroom, on the hall ceiling, and it would definitely be very annoying if it were in line-of-sight to my bed.

    Duct tape is too sticky for something like this; the residue would be very hard to remove.
    White electrical tape should be a good choice.

    Barry
  • 0
    Well from firmware-side I know it's possible because our first hardware prototypes had non-working LEDs and we had to code that first ;-). But I don't know if that'll be implemented as an option.
Unfiltered HTML