Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 38 replies
  • Subscribers 1 subscriber
  • Views 28096 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to disconnect wireless user

Breakingcustom
Is there a way from the web interface to kill someone's wireless connection or does it have to be done via SSH?


This thread was automatically locked due to age.
Parents
  • 0
    The thing is, I did have them set to Bridge to VLAN before and the problem was DHCP wasn't working properly.  There is a bug though they said that when you click on Wireless Networks the IP could show wrong.

    It worked before when I did Bridge to VLAN.  What I might do is set the Guest Wireless to a VLAN and change the other two wifi networks back.  I shouldn't need to tag anything on the actually switch port that the AP is plugged into or the AP itself.  I'm assuming that the controller will handle all of that.
Reply
  • 0
    The thing is, I did have them set to Bridge to VLAN before and the problem was DHCP wasn't working properly.  There is a bug though they said that when you click on Wireless Networks the IP could show wrong.

    It worked before when I did Bridge to VLAN.  What I might do is set the Guest Wireless to a VLAN and change the other two wifi networks back.  I shouldn't need to tag anything on the actually switch port that the AP is plugged into or the AP itself.  I'm assuming that the controller will handle all of that.
Children
No Data
Unfiltered HTML