In the Student Wireless network you will see two IP's marked in red. Those should be in the Administration SSID. And then you'll see a 172 address in the Administration SSID and that is the Guest Wireless.
On the ProCurve switch I have port going from it to the switch trunking VLAN40/41. The same goes for the AP ports on the ProCurve although you can only select one VLAN for a SSID.
In the Student Wireless network you will see two IP's marked in red. Those should be in the Administration SSID. And then you'll see a 172 address in the Administration SSID and that is the Guest Wireless.
On the ProCurve switch I have port going from it to the switch trunking VLAN40/41. The same goes for the AP ports on the ProCurve although you can only select one VLAN for a SSID.
The attached screenshots show in Wireless Networks someone connected to the Student Wireless with the wrong IP, although if you look at the DHCP lease table there are 3 leases for that MAC address and only one is valid (which is the right IP range). So why does it show the wrong IP under Wireless Networks?
Also, shouldn't the IP's that are off lease disappear from the lease table?
