Hi [[[[;)]]]]
i hope someone can support me with my problem.
I want to install an new wireless network and include the old one until we moved all APs.
Actual situation:
- ASG 9.100-16 (Softwarecluster)
- vlan 110 internal wlan
- vlan 150 public wlan
- vlan 666 management without DHCP
- 110/150 come tagged to my cisco APs, 666 untagged for managment
- at the new building i have 4xAP3
- is send out only my internal SSID
- the network comes untagged to the AP30s
That works [[[[;)]]]]
What i want to do:
- deploy the hotspot functionality to the vlan 150 (guests)
- deploy dhcp in the hotspot vlan
- deploy internal network communication to vlan 110
- both networks must be separated [[[[;)]]]]
- use the old APs (vlan150) with the hotspot functionality until we change them during the next half year
- use the AP30s with both vlans
- the vlan 666 is optional, if required for management.
I read anywhere that this is possible and hope that's true.
Now i tried several configurations with the UTM Profiles, but i can't get a success. sometimes the APs are lost connection, sometimes connected, but no traffic can pass ...
Does anyone have a guide or did such a solution before? is there one who can give me something in my hands to complete my task?
Thank you for reading my troubles [[[[;)]]]]
This thread was automatically locked due to age.
