Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 10929 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reflashing AP30 with Engenius Firmware

NicolasPerrot1
Hi there,

half a year ago i've bought an AP30 for my Astaro Home Licence. I'll no longer use my astaro in future. It is possible to flash AP30 with Engenius EAP9550 firmware to use it with an normal router ?


This thread was automatically locked due to age.
Parents
  • 0
    Hi saksu,

    If you read peter's post closer, it sounds like he tried and bricked it. Engenius only allows firmware updates to their kit via their web interface so needing a tftp firmware hints at problems with the 9550 after reflash.
  • 0 in reply to TheDrew
    @peterkieser

    the source code for EAP9550 can be found on the engeniustech
    Website under resources Firmware. It's under GPL.
    There is also a uImage binary in the GPL file for
    unbricking your EAP9550.


    Jo-H
Reply Children
No Data
Unfiltered HTML