Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 4238 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP50 no 5ghz channels

rfcat_vk
Hi,
I have an AP 50 which quite happily works on the 2.4ghz band, blue light on etc. The 5ghz band, no blue light.
In the same room as the AP50 are 3 5ghz phones.
I have checked the configuration and it shows 5ghz active, 100% and 4 channels available. It is assigned an SSID which works with the 2.4ghz band.
The log doesn't show anything obvious to me.
[:)]
Any ideas?

Thank you 

Ian


This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to trollvottel
    Hi folks,
    thank you all for your replies. I found the cause of my grief, failed to enable the SSID to use 5Ghz.
    Now done will try it out when I get home.

    Ian[:$][:)][:D]

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML