This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP50 no 5ghz channels

Hi,
I have an AP 50 which quite happily works on the 2.4ghz band, blue light on etc. The 5ghz band, no blue light.
In the same room as the AP50 are 3 5ghz phones.
I have checked the configuration and it shows 5ghz active, 100% and 4 channels available. It is assigned an SSID which works with the 2.4ghz band.
The log doesn't show anything obvious to me.
[:)]
Any ideas?

Thank you

Ian

This thread was automatically locked due to age.

Parents

0 treskaan over 11 years ago

Hi Ian,
the 5ghz band should be active, if you assign a 5ghz SSID (you can choose 2.4ghz and 5ghz, then both bands are available).
Greetings,
Andreas
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 treskaan over 11 years ago

Hi Ian,
the 5ghz band should be active, if you assign a 5ghz SSID (you can choose 2.4ghz and 5ghz, then both bands are available).
Greetings,
Andreas
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 rfcat_vk over 11 years ago in reply to treskaan

Perhaps I didn't make my problem very clear.
I have the same SSID for both the 2.4ghz and 5.0ghz on the AP50.
The 2.4ghz band works, the 5.0ghz band doesn't.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
- wireless.jpg
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel