Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 8818 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bridge to VLAN

Johannes Hiby
Hi,

if i create a new wireless Network on a AP30 with VLAN, i get folowing message
if i try to group it to the AP:

The VLAN settings of the access point 'A4000*********X' conflicts with the client 
traffic option: 'Bridge to VLAN' of the SSID 'ABCD'.

Software: UTM 9.004-33 

Any Idea?

Johannes


This thread was automatically locked due to age.
Parents
  • 0
    Hi,

    it looks like you haven't activated VLAN on your AP30.
    To use a SSID with "Bridge to VLAN" your access point have to connect to 
    the UTM via VLAN. 
    That means you have to configure a VLAN interface, add it to the Allowed Interfaces and
    configure your AP to use VLAN with the same VLAN tag and plug your AP to this interface.
    It is important, that you configure your access point with the correct VLAN settings before 
    plugging it to the VLAN interface, otherwise he won't ever get the new config.

    regards,
    Emanuel
  • 0 in reply to etaube
    Hi,

    does it meen, that i can only use one vlan for the AP?

    or can i use vlan x for SSID x and vlan y for SSID y?

    Johannes
Reply Children
No Data
Unfiltered HTML