Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 2438 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Initial installation of an AP30

jkontny
HI there!
Sorry, but I failed to configure an AP30 on an ASG9.
I connected the AP, checked in the DHCP Server (on my Windows-Server) that it obtained an IP.
But I don't know how to access the web-interface - if it has one and it doesn' appear in the AP-Lists of the Wirless-Scuritiy-Section of the ASG.
I found the little symbols on the right, but there appears nothing.

Thanks für help!!
Greeting from here ;-)) J.Kontny


This thread was automatically locked due to age.
Parents
  • 0
    Ok, now I configured a new network on eth7 with a dhcp-server.
    I can see, the the AP30 gets an IP, but it still can't be found in the ASG-Wireless-Security.
    The AP30 ist directly connected to eth7.
    Here we go ;-))
Reply
  • 0
    Ok, now I configured a new network on eth7 with a dhcp-server.
    I can see, the the AP30 gets an IP, but it still can't be found in the ASG-Wireless-Security.
    The AP30 ist directly connected to eth7.
    Here we go ;-))
Children
No Data
Unfiltered HTML