Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 799 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30 in VPN connected sites

isaacho
We have an UTM425 in HQ and would like to connect an AP30 in our VPN connected remote office (not using RED).

HQ   Remote Office
+++++++++  +++++++++
10.0.0.0/24 +----------------------------+10.0.1.0/24+-----AP30
+++++++++ +++++++++

is it possible to have this working?
If yes, how should I configure the default gateway for my AP30?[:)]


This thread was automatically locked due to age.
  • 0
    It should work fine so long as the traffic from the AP30 to IP 1.2.3.4 is routed so it hits an allowed interface on the head end ASG, it should work.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0
    What Bruce means is that 1.2.3.4 should be added to 'Local networks' in the 425 VPN definiton and to the equivalent of 'Remote networks' in the VPN device at the remote office.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML