This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP30: Antenna coverage graph

Hello,
in order to study the positioning of my access points, I need the coverage graph of AP30. I downloaded some datasheets but I cannot find this information. Where is it? [:D]

bye
eclipse79

This thread was automatically locked due to age.

Parents

0 Daniels_UTM over 11 years ago

could anyone tell me the product ID there for the AP50?
Cancel
Vote Up 0 Vote Down

Cancel
0 Daniels_UTM over 11 years ago in reply to Daniels_UTM

i found my answer here:

https://community.sophos.com/products/unified-threat-management/astaroorg/f/113/t/71372
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 11 years ago in reply to Daniels_UTM

I read the specs and wonder, is it 300mb/s one way or 300mb/s bothways eg 150mb/s each way?

I know what most wifi devices are advertised as. My AP10s give about 65-70mb/s registered throughput and the AP50 gives about 130mb/s registered throughput, but is that both ways as a total or is that each way?

ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 rfcat_vk over 11 years ago in reply to Daniels_UTM

I read the specs and wonder, is it 300mb/s one way or 300mb/s bothways eg 150mb/s each way?

I know what most wifi devices are advertised as. My AP10s give about 65-70mb/s registered throughput and the AP50 gives about 130mb/s registered throughput, but is that both ways as a total or is that each way?

ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data