Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 1 subscriber
  • Views 3355 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP10 Terrible Range and Throughput

ataylor
I just added a AP10 to my home user setup and the performance is terrible, I was expecting to see a range bump over the consumer grade netgear router I had running as a access point. The signal strength is actually worse than what I had, I am getting like 50% from about 15 ft away with clear sight.  Doing FTP transfers are really slow and even web browsing lags. Is there a way to change signal power in these? What are others seeing for performance? Maybe I just have a dud??

Thanks for your input.


This thread was automatically locked due to age.
Parents
  • 0
    as far as hardware I have the AP10 going into a simple gigabit switch, which also the server running esxi with an ASG VM on it is connected.
    Is a screen shot of how I have the network setup. http://screencast.com/t/kVi5tBswJJ
    If I do a file transfer with the AP10 I get like 1.5MB/s if I switch over to the Netgear it goes to 5~6/MB/s
  • 0 in reply to ataylor
    When you go to the wireless protection page on the webadmin what speed does your laptop show as connecting at?
    Is your AP10 setup for autochannel allocation?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to ataylor
    When you go to the wireless protection page on the webadmin what speed does your laptop show as connecting at?
    Is your AP10 setup for autochannel allocation?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML