Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 2678 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Creating WLAN1

cerrito
Hi 

I have an ASG220 with Wireless Security enabled. I have the public guest wlan and a internal WLAN SSID with the option brigde to LAN enabled. This works without problems. 

But how can i add an additional WLAN (like a additional guest wlan) interface without implementing VLAN in our network.

Is that possible?

cheers

mathias


This thread was automatically locked due to age.
  • 0
    If you have configured this with an Astaro Wireless Access Point, you already have a VLAN between the ASG and the AP for the guest wlan.  You can add other SSIDs without worrying about switches routing the VLANs required between the ASG and the AP.

    Did that answer your question?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0
    Hi cerrito,

    This is very Easy, just cremte a New Wireless Network with the type "separate zone", that will create a new virtual interface on the asg as well a tunnel that sends the packets from the access point directly to the ASG and there you can decide with firewall rules where these users are allowed to go.

    It's kinda VLAN, yet we configure everything and no other configuration on switches are required.

    Hope that helps,
    Regards Gert
Unfiltered HTML