This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP-10 hang up all the Time

We have 15 AP-10 in our network.
Since the update to version 8.202, we have the problem that the AP's hang up all the time.
This means that wireless networks are still visible and you can connect to it. But then comes the messag limited cennectivity.
If you unplug the Power from the AP and Plug it in again it will work fine fore 1-2 Days.
We do this every day whit one ore more from these AP's.
someone he has a solution for this?
and why is a normal workstations without wireless in the wireless log?
In this example the workstation WKGE008?[:S]
I checkd the DNS and DHCP entry there are no double Entrys.

thanks for the Help and inputs..

This thread was automatically locked due to age.

logwifi.zip

Parents

0 Sascha Paris over 12 years ago

Do you have QoS active on one of the wifi interfaces, or the network, where the AP is connected? Try to with disabled QoS then...

Wer Schreibfehler findet, darf sie behalten. Wenn ich via IPad poste, sind Verschreiber und grammatikalische Aussetzer irgendwie an der Tagesordnung.
Cancel
Vote Up 0 Vote Down

Cancel
0 Peter D over 12 years ago in reply to Sascha Paris

Hey guys,

do you use WAP2 or WAP?

There are problems with WAP2 in asg and some specific clients.
After a restart of AP everything works fine for a time.

Changing security to WAP could help. But actually i thought, this bug was resolved in 8.301... [:S]

mfg

Peter
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Peter D over 12 years ago in reply to Sascha Paris

Hey guys,

do you use WAP2 or WAP?

There are problems with WAP2 in asg and some specific clients.
After a restart of AP everything works fine for a time.

Changing security to WAP could help. But actually i thought, this bug was resolved in 8.301... [:S]

mfg

Peter
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data