This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2x WPA2 Enterprise bridged networks not working

Hi,

i have a problem with the following setup.

3 wireless networks:
1. guest network -seperate zone (default)
2. network 1 - bridged to ap
--
3. network 2 - bridged to ap
With only the first two networks everything is working fine.
if i add the third network , you can not authenticate in network 2. or 3.

Authentication mode is WPA2 Enterprise, Astaro version is 7.510 .

Have anyone Wireless running with 2 bridged networks with wpa2 enterprise auth?

I have a ticket running since Nov. 2010, an no one at astaro can reproduce. I have two astaros running an both have the same issue.

greetings

This thread was automatically locked due to age.

Parents

0 BAlfson over 13 years ago

Have you tried to look (like with WireShark) at the traffic on the AP-Lan? To see what happens when the second SSID is activated? I ask that because it appears that Astaro does its job authenticating, but then the DHCP server in the LAN seems to not be receiving requests from the AP.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 13 years ago

Have you tried to look (like with WireShark) at the traffic on the AP-Lan? To see what happens when the second SSID is activated? I ask that because it appears that Astaro does its job authenticating, but then the DHCP server in the LAN seems to not be receiving requests from the AP.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data