Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 2797 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless AP QoS

cemler
Do the Access Points (either AP10 or AP30) have thier own QoS, or do they simply pass/use the QoS configuration of the ASG devices?


This thread was automatically locked due to age.
  • 0
    The APs itself are doing QoS on the wireless interface by prioritizing traffic classes as specified in 802.11e.

    Hope this helps,
    Helmut
  • 0
    Hi, cemler, and welcome to the User BB!

    Helmut, I think I'm more confused now that before cemler asked the question. [;)]

    So, there are two types of QoS associated with Astaro WAPs.  The WAP itself does QoS among wireless users attached to it according to 802.11e.  Astaro QoS can be applied at the level of the Astaro interface to which the WAP is connected, but the QoS settings in the Astaro do not affect any QoS settings in the WAP.

    Correct?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    So, there are two types of QoS associated with Astaro WAPs.  The WAP itself does QoS among wireless users attached to it according to 802.11e. 


    Yep.


    Astaro QoS can be applied at the level of the Astaro interface to which the WAP is connected, but the QoS settings in the Astaro do not affect any QoS settings in the WAP.

    Correct?


    Yep.

    Helmut
Unfiltered HTML