This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Enterprise WPA2 RADIUS config question

I’ve configured a WPA2 Enterprise Wi-Fi Network. For authentication I use a Microsoft Server 2008 with a Network Policy Server (NPS). Now I’ve trouble with the authentication of the Wi-Fi client. Did anyone configure the RADIUS authentication against the NPS Server successfully? What are the correct settings for the “Connection Request Policies” and “Network Policies”?

Thanks,

Ben

This thread was automatically locked due to age.

Parents

0 bartjenniskens over 13 years ago

Radius config question; I can't save any radius server configuration for wireless security. There is no "Apply" button on the advanced tab?
Cancel
Vote Up 0 Vote Down

Cancel
0 bartjenniskens over 13 years ago in reply to bartjenniskens

Radius config question; I can't save any radius server configuration for wireless security. There is no "Apply" button on the advanced tab?

There is a difference between ASG 8.102 and ASG 7.509.
See my screenshots for example. The ASG 8.102 is missing fields and buttons to configure radius for wireless.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 bartjenniskens over 13 years ago in reply to bartjenniskens

Radius config question; I can't save any radius server configuration for wireless security. There is no "Apply" button on the advanced tab?

There is a difference between ASG 8.102 and ASG 7.509.
See my screenshots for example. The ASG 8.102 is missing fields and buttons to configure radius for wireless.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data