Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 1 subscriber
  • Views 7848 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Enterprise WPA2 RADIUS config question

bschwitzer
I’ve configured a WPA2 Enterprise Wi-Fi Network. For authentication I use a Microsoft Server 2008 with a Network Policy Server (NPS). Now I’ve trouble with the authentication of the Wi-Fi client. Did anyone configure the RADIUS authentication against the NPS Server successfully? What are the correct settings for the “Connection Request Policies” and “Network Policies”?

Thanks,

Ben


This thread was automatically locked due to age.
Parents
  • 0
    Ben, is this an Astaro question?  If so, change the sequence of authorization servers to have the AD server after the RADIUS server definition.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Ben, is this an Astaro question?  If so, change the sequence of authorization servers to have the AD server after the RADIUS server definition.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    Hello,

    i have maybe the same problem. In which log can i see the authentication tries to the radius server ?

    I don't get any errors or success messages in the event manager of my DC/RADIUS Server.

    The client tries to connect and gets disconnected.

    I just entered the radius server with the shared secret under advanced settings. (Btw is there the possibility to add a server group ?!)

    I've already set up a wireless lan with HP accesspoints which is running already (so it can't be the setting ?!?)

    Greets
    Stephan
Unfiltered HTML