Just unboxed a couple of AP 30s for my house and noticed that they had the power injectors for POE with them. I hadn't realized that they were going to come with injectors so I had purchased a POE switch a few weeks ago when I was prepping for this day. So I plugged the the injector into my switch and the AP 30 and then powered it up. I got a solid blue light for power and blinking blue light for wireless (the LAN LED did not light up). After waiting for it to boot up (I actually waited more like 10 minutes) I went down, upgraded my ASG to 7.508 and made sure my license (home user) allowed for wireless (which it does). I went to the Wireless Security tab and then to Access Points page, but nothing was listed. I checked just about every setting throughout my ASG to make sure that somehow I hadn't blocked it in some way. After about an hour, on a lark I decided to plug in the POE switch I had purchased instead of the POE injector that came in the box. Bam, the ASG found the AP 30 right away. Just for grins and giggles I unplugged the POE switch and plugged the injector back in and it worked just fine.
So, long story short, I'm not sure what's going on, but I think there's something wrong with the injectors. They just don't work for the initial install. I bought 6 AP 30s and I had this same issue with the 3 that I tried.
This thread was automatically locked due to age.
